Teltonika RUT950 WiFi 4 3G/4G LTE Cat 4 Router w/ 2 x Embedded SIM Slots

Mobile

Mobile module

• 4G (LTE) Cat 4 – Up to 150 Mbps
• 3G – Up to 42 Mbps
• 2G – Up to 236.8 kbps

SIM switch

• Two (2) SIM cards (not included)
• Auto-switch cases:
• Weak signal
• Data limit
• SMS limit
• Roaming
• No network
• Network denied
• Data connection fail
• SIM idle protection

Status

• Signal strength
• SINR
• RSRP
• RSRQ
• Bytes sent/received

Bridge

• Direct connection (bridge) between mobile ISP and device on LAN

SMS

• SMS status
• SMS configuration
• Send/read SMS via HTTP POST/GET
• EMAIL to SMS
• SMS to EMAIL
• SMS to HTTP
• SMS to SMS
• Scheduled SMS
• SMS autoreply
• SMPP

Black/White list

• Operator black/white list

Multiple PDN (optional)

• Possibility to use different PDNs for multiple network access and services

Band management

• Band lock
• Used band status display

Wireless

Wireless mode

• IEEE 802.11b/g/n, Access Point (AP), Station (STA)

WiFi

• WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter

WiFi security

• WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation

SSID

• SSID stealth mode and access control based on MAC address

WiFi users

• Up to 100 simultaneous connections

Hotspot

• Captive portal (Hotspot), internal/external Radius server, built in customisable landing page

Ethernet

WAN

• 1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

LAN

• 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Network

Routing

• Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)

Network protocols

• TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL)

VoIP passthrough support

• H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring

• Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall

• Port forward, traffic rules, custom rules

DHCP

• Static and dynamic IP allocation, DHCP Relayd

QoS

• Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS

• Supported >25 service providers, others can be configured manually

Network backup

• VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover

Load balancing

• Balance your internet traffic over multiple WAN connections

Security

Authentication

• Pre-shared key, digital certificates, X.509 certificates

Firewall

• Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention

• DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

WiFi security

• WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation

VLAN

• Port based and tag based VLAN separation

Mobile quota control

• Set up custom data limits for both SIM cards

WEB filter

• Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

Access control

• Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN

• Multiple clients and server can be running simultaneously, 12 encryption methods

OpenVPN Encryption

• DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec

• IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

GRE

• GRE tunnel

PPTP, L2TP

• Client/Server services can run simultaneously

Stunnel

• Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code

SSTP

• SSTP client instance support

Modbus

Modbus TCP slave

• ID range
• 1-255

Modbus TCP master

• Supported functions
• 01, 02, 03, 04, 05, 06, 15, 16
• Supported data formats
• 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped)

Monitoring & Management

WEB UI

• HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

FOTA

• Firmware update from sever, automatic notification

SSH

• SSH (v1, v2)

SMS

• SMS status, SMS configuration, send/read SMS via HTTP POST/GET

TR-069

• OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT

• MQTT Broker, MQTT publisher

SNMP

• SNMP (v1, v2, v3), SNMP trap

JSON-RPC

• Management API over HTTP/HTTPS

MODBUS

• MODBUS TCP status/control

RMS

• Teltonika Remote Management System (RMS)

System Characteristics

CPU

• Atheros Wasp, MIPS 74Kc, 550 MHz

RAM

• 128 MB, DDR2

FLASH memory

• 16 MB SPI Flash

Firmware / Configuration

WEB UI

• Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

FOTA

• Update FW/configuration from server

RMS

• Update FW/configuration for multiple devices

Keep settings

• Update FW without loosing current configuration

Firmware Customisation

Operating system

• RutOS (OpenWrt based Linux OS)

Supported languages

• Busybox shell, Lua, C, C++

Development tools

• GPL package with build environment provided

Input/Output

Input

• 1 x Digital Input

Output

• 1 x Digital Output

Events

• SMS, EMAIL, RMS

Power

Connector

• 4 pin industrial DC power socket

Input voltage range

• 9 – 30 VDC (4 pin industrial socket), reverse polarity protection; surge protection >31 VDC 10us max

PoE (passive)

• Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards

Power consumption

• < 2 W idle, < 7 W Max

Physical Interfaces (Ports, LEDs, Antennas, Buttons, SIM)

Ethernet

• 4 x RJ45 ports, 10/100 Mbps

I/O’s

• 1 x Digital Input, 1 x Digital Output on 4 pin power connector

Status LEDs

• 1 x Bi-colour connection status LED
• 5 x Connection strength LEDs
• 4 x LAN status LEDs
• 1 x Power LED

SIM

• 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders

Power

• 4 pin DC connector

Input/Output

• 2 x Programmable Inputs/Outputs

Antennas

• 2 x SMA for LTE
• 2 x RP-SMA for WiFi antenna connectors

Reset

• Reset/restore to default button

Physical Specification

Casing material

• Aluminium housing, plastic panels

Dimensions (W x H x D)

• 110 x 50 x 100 mm

Weight

• 235 g

Mounting options

• DIN rail (can be mounted on two sides), flat surface placement

Operating Environment

Operating temperature

• -40ºC to 75ºC

Operating humidity

• 10% to 90% non-condensing

Ingress Protection Rating

• IP30

MTBF

• 270,000 hrs

Regulatory & Type Approvals

Regulatory

• CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, WiFi Alliance

Operator

• AT&T, Verizon

EMI Immunity

Standards

• Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0

ESD

• EN61000-4-2:2009

RS

• EN 61000-4-3:2006 + A1:2008 + A2:2010

EFT

• EN 61000-4-4:2012

Surge immunity (AC Power Line)

• EN 61000-4-5:2006

Surge immunity (Ethernet ports)

• EN 61000-4-5:2014, clause 7.1 of ITU-T K21

Transient and surges

• ISO 7632-2:2004

CS

• EN 61000-4-6:2009

DIP

• EN 61000-4-11:2004

RF

Standards

• EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1
• AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017

Safety

Standards

• IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
• AS/NZS 60950.1:2015
• EN 50665:2017, EN 62311:2008

Environmental

Ingress Protect

• LST EN 60529:1999+A1+AC:2002

Vibration

• Class guideline-DNVGL-CG-0339:2016
• EN 60068-2-6:2008

Package Contents

• 1 x RUT950 router
• 1 x UK Power supply
• 2 x LTE antennas (swivel, SMA male)
• 2 x WiFi antennas (swivel, RP-SMA male)
• 1 x Ethernet cable (1.5 m)
• 1 x QSG (Quick Start Guide)